Vinotemp VC190BG Manual y guía del usuario descargar pdf (Pagina 17)

17

USA

Operation and function

g. 8

Electronic control

The electronic control (g 8) ensures that

the temperatures set at the top and at the

bottom of the appliance are maintained.

This is achieved by means of an advanced

control of the refrigeration system, the heat-

ing element, and the fan. The set tempera-

ture will be stored in the event of power

failure.

The electronic control has the following

functions:

● On/off switch

● Light switch*

● Temperature setting

● Temperature indication

● Alarm for too high and too low tempera-

tures

● Door alarm

* The light may either be turned on

constantly or only when the door is open.

Temperature indication

The display shows the actual temperature.

The upper digits of the display indicate the

temperature at the top of the appliance, and

the lower digits of the display indicate the

temperature at the bottom of the appliance.

The temperature indicator is equipped with

a built-in lter which simulates the actual

temperature in the bottles. Consequently,

the indicator does not react on short-term

uctuations of the air temperature

Temperature setting

The thermostat is equipped with a child lock

device. This device is activated by pushing

the “up and down” buttons simultaneously.

After approx. 3 seconds “Pof” ashes in the

display. Then the actual temperatures are

shown as usual. In addition, the set tem-

peratures can be shown by pushing SET1

and SET2, respectively.

The child lock device is cancelled by push-

ing the “up and down” buttons simultane-

ously. After approx. 3 seconds “Pon” ashes

in the display, and the temperature can be

set.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios